Specifications

Item Number
LAHYDROBAN1
Size
1 Gallon
Coverage
Color
Delta IIC
Grade
Indoor/Outdoor
MVER
Material
PSI (Compressive)
RH
Residential/
Commercial
Stocking Colors
Voltage
PH

Features & Benefits

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane. Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing) Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions) Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured Bonds directly to metal PVC and ABS plumbing fixtures only Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test) Changes in color from a light sage to an olive green when cured Equipped with Microban® antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane Rapid drying for a faster time to tile Install tile. brick and stone directly onto membrane Exceeds ANSI A118.10 and A118.12 IAPMO approved Lighter color for ease of inspection Non-flammable

Related Collections

Horseshoe 1/8″

BA12020

KERACAULK S

KERAFLEX PLUS

KERAFLEX PLUS